If you have a tooth that just doesn't look good because of decay or injury, a porcelain laminate veneer is probably a good way to make it look as good as it ever did — and maybe even better! Dental veneers are composed of thin layers of dental ceramic material. They essentially replace the original tooth enamel and require preparation of the tooth by removing a small amount of enamel to allow room for the placement of the veneer.

Recently, more and more dentists have been using minimal prep or prepless techniques that do not require this preparation. In such cases, the porcelain is bonded directly to the outer layer of the tooth's enamel. Highly skilled dental technicians can design a custom-fit veneer that feathers into the tooth just short of the gum line.

Prepless techniques cannot be used in all situations, but when they are used appropriately the results are beautiful and very stable. Should you get prepless veneers? The following is a list of advantages and disadvantages of prepless veneers.

Advantages of prepless veneers include:

• Tooth preparation or reduction is not needed, leaving the original tooth whole.
• They are not placed under the gum tissue, eliminating the possibility that the restorations negatively impact the gum tissue.
• They can be used to change the appearance of teeth that are too small or misshapen making the teeth look larger and eliminate unwanted spacing.
• They can be used to “lengthen” teeth that have been worn down by grinding.
• Since the underlying tooth has not been reduced, prepless veneers are reversible and practically risk-free.

Disadvantages include:

• There are many cosmetic situations in which they cannot be used, and traditional veneers (requiring preparation) must be used instead.
• Prepless veneers cannot be used in cases in which orthodontic treatment is recommended to move the teeth, such as improper tooth position, poor bite, or a poor facial profile.
• Since they are added on to existing tooth structure, they do not work for teeth that are relatively large or in a forward position in a smile.
• They do not usually work for lower teeth because of space restrictions.
• They cannot replace lost or damaged enamel.

Working with prepless veneers requires special skills and training. Please discuss our credentials and experience with us when you inquire about this technique. We can assess your specific situation and let you know whether restoration without the drill is appropriate for you.

Contact us today to schedule an appointment to discuss your questions about prepless veneers. You can also learn more by reading the Dear Doctor magazine article “Porcelain Veneers Without the Drill.”

If an adult has lost his or her teeth (a condition called “edentulism”), full removable dentures (false teeth) can restore the person's appearance and ability to bite, chew, and talk properly. Even with our current extensive knowledge about tooth care and restoration, over 25 percent of Americans have lost all their teeth by the time they are 65.

How much do you know about dentures? Test yourself below.

How does tooth loss affect your bones?
Bone is a living substance that is constantly changing and rebuilding itself, depending on signals it receives from surrounding tissues. The bone that surrounds your teeth is called alveolar bone (from “alveolus,” meaning sac-like). To keep healthy, alveolar bone needs stimulation or function such as chewing and your teeth touching your opposing teeth. If you lose your teeth, bone begins to melt away (resorb).

How can we minimize bone loss during tooth extraction?
We can maintain bone volume by using bone grafting techniques. While this sounds scary, it is a relatively easy procedure. The principle of bone grafting is to build a sort of scaffolding on which your body begins to build and maintain its own bone. Bone loss can be prevented by the placement of a few dental implants.

How are dentures designed and created?
The dentures that look best and work best for you are based on your original teeth. We often utilize photographs of how you looked with your natural teeth, along with your input about possible changes you would like to see. First we take detailed impressions (molds) of the residual ridges in which your teeth once rested. From these we make denture bases of a light cured plastic resin. We attach horseshoe-shaped rims made of wax to the bases, to simulate the position of the teeth as we work out their design and spacing, based on both appearance and function. The prosthetic teeth are then tried out in your mouth, adjustments are made, and the dentures are processed in a dental laboratory. The final product substitutes a pink colored plastic (methyl methacrylate) to represent the gums and white plastic material as the teeth, created to make them look as natural as possible.

What is your part in the denture fitting process?
As a patient with new dentures, you must learn to use your jaw joints, ligaments, nerves, and muscles in new ways to help stabilize your dentures and to relearn to speak, bite, chew, smile, and laugh with these new structures. It takes a little practice, but with your removable dentures you can once again enjoy a complete and normal life.

Contact us today to schedule an appointment to discuss your questions about full removable dentures. You can also learn more by reading the Dear Doctor magazine article “Removable Full Dentures.”

What is composite resin bonding?
This term refers to a kind of tooth-colored material that is a mixture of a plastic resin and a glass filler. The glass gives the mixture, or composite, strength and translucency that is similar to a natural tooth. The composite is bonded to the tooth by slightly abrading or roughening the tooth so that the resin fills in small cuts in the tooth surface and bonds with it. The end result functions and looks like part of the original tooth.

What is bonding used for?
This technique is a good way to restore chipped or stained teeth or to change a tooth's shape or color. It can also be used to restore parts of a tooth near the gum line where the gums have receded and left the root partially exposed.

What are the advantages of bonding?
Composite resin tooth restorations have several advantages.

• They take only a single dental visit because they are done right in the dental chair rather than having to be sent to a dental lab for preparation.
• They are less expensive than many other dental restorations.
• They leave most of the original tooth intact since little tooth preparation or drilling has to be done in order to make the composite material bond to the tooth.
• They can be made in a wide range of colors and can be matched well with the teeth around them.
• Because little of the original tooth has to be removed, they are a good choice for teens, whose dental arches (upper and lower jaws) are still developing.

What are the disadvantages of bonding?
The composite resin material is not as strong as the original tooth material, so the bonded restorations may not last over a long time. If it does last, the material may also stain as it ages.

When should you choose bonding?
Composite resin bonding is a good choice for a quick and attractive tooth restoration that may be replaced later by something more permanent, such as porcelain veneers.

Contact us today to schedule an appointment to discuss your questions about bonding. You can also learn more by reading the Dear Doctor magazine article “Repairing Chipped Teeth.”

We tend to think of aspirin as a harmless medication. It is dispensed over the counter and is the most widely used OTC medication in the U.S. We take it without thinking we may be exposing ourselves to risks. But in certain situations aspirin can cause dangerous side effects.

What is aspirin, and how does it work?
The chemical name for aspirin is acetylsalicylic acid. It is used to reduce mild pain, inflammation and fever. When you take an aspirin, it blocks the formation of prostaglandins, substances your body creates that are associated with inflammation. Prostaglandins cause inflamed tissues to become red and swollen, but they also serve protective purposes, such as forming a barrier that protects the stomach from the acid it produces to digest your food. That's why long-term aspirin use can sometimes cause stomach bleeding and ulceration or other health problems.

Why do cardiac patients take aspirin?
Another effect of aspirin is to prevent blood platelets from clumping together. Blood platelets are structures in the blood, smaller than white or red blood cells, that aid clotting by sticking together at the site of an injury. This effect of aspirin can cause prolonged bleeding, but it may be beneficial to people who have cardiovascular (from cardio, meaning heart; and vascular, meaning vessel) disease with narrowed blood vessels.

Aspirin can keep blood flowing in the obstructed vessels and thus prevent heart attacks and strokes; but it can also increase the risk for strokes that are caused by bleeding in the brain. Most physicians attempt to lower such risks by asking their patients to keep their daily aspirin consumption to a low dose 81 mg “baby” aspirin.

How does aspirin affect your teeth and gums?
Be sure to let your medical and dental professionals know you are taking aspirin, and how much you take. Also tell us about other OTC medications you take, including herbal medications and supplements, because they may interact with aspirin to cause side effects.

If you have been told to take aspirin because of a cardiac condition or procedure, be sure to follow your recommended treatment. Do not suddenly discontinue aspirin therapy; doing so can increase your risk for heart attack and stroke. Ask us if you should stop taking aspirin before a major dental or oral surgery, but do not stop taking it on your own. We will consult with your physician about your medical condition and let you know our recommendation. In most cases you can continue your aspirin therapy without causing excessive bleeding during the dental procedure.

Contact us today to schedule an appointment. You can also learn more by reading the Dear Doctor magazine article “Aspirin: Friend or Foe?”

For many people, when they hear the term “laser,” they immediately envision a futuristic science fiction movie. However, did you know that lasers have been used in the medical industry for years? Furthermore, this revolutionary technology is now beginning to do the same within the field of dentistry.

Lasers get their name from “Light Amplification by Stimulated Emission of Radiation” and are literally beams of light that have a single wavelength. Unlike traditional white light or daylight that is a continuum of light with many wavelengths corresponding to the visible spectrum or rainbow, a laser light beam is just a single color.

Dental laser usage typically falls into three categories: disease diagnosis; soft tissue procedures of the gums, lips, and tongue; and hard tissue procedures of the bone or tooth enamel and dentin. For example, common uses include diagnosing cavities, treating disease, and removing both diseased gum tissues and tooth structure, as in decay. They were first used in dentistry for soft tissue surgery such as gum line reshaping procedures and tissue testing (biopsies). In 1997, dentists started using them for removing decay and preparing the tooth enamel and dentin in preparation for fillings. More recently, dentists are using lasers to help detect and diagnose dental disease, as they are especially helpful in identifying dysplastic (“dys” – altered; “plasia” – growth) or precancerous tissue as well as cancerous tissues. Thus they have been used for removing both malignant (cancerous) and benign (non-cancerous) lesions in some cases.

As you now see, laser dentistry is an important tool we use at our office to provide our patients with optimal dental care and treatments. And if you want to learn more about laser dentistry, read the article “Lasers Shine A Light On Dentistry.” Or if you want to schedule an appointment to see if laser dentistry is right for you, contact us today.